Heating Checklist for ESA

Technician Name: _________________ Date: __________________

Clean and visually inspect heat exchanger
Carbon Monoxide levels tested
Cleaned and inspect burners
Cleaned and inspected Pilot assembly
Cleaned and inspected Flame Sensor
Cleaned and inspected all proper safeties and limits, confirmed proper operation and safety levels
Cleaned and inspected burner compartment
Cleaned and inspected all wiring and electrical components
Changed filter or cleaned air cleaner
Cleaned and inspected blower assembly
Lubricate all oil-able motors
Cleaned and inspected Flue
Furnace started k
Gas pressure verified and adjusted if necessary
Temperature rise verified and adjusted if necessary per manufacturers specifications
Confirmed proper operation of thermostat and equipment staging

Furnace Manufacturer: ______________
Furnace model number: ______________________________
Furnace serial number: ______________________________
Filter sizes: _________ _________ _________ __________
Belt size:__________
Carbon Monoxide level reading: _____ ppm
Gas pressure reading: ______ iwc
Furnace temperature rise: _______ degrees

Comments or Concerns by technician: