Property work performed at: _____________________________
Technician Name: _________________ Date: __________________
____ Clean and visually inspect heat exchanger
____ Carbon Monoxide levels tested
____ Cleaned and inspect burners
____ Cleaned and inspected Pilot assembly
____ Cleaned and inspected Flame Sensor
____ Cleaned and inspected all proper safeties and limits, confirmed proper operation and safety
____ Cleaned and inspected burner compartment
____ Cleaned and inspected all wiring and electrical components
____ Changed filter or cleaned air cleaner Â
____ Cleaned and inspected blower assembly
____ Lubricate all oil-able motors if availableÂ
____ Cleaned and inspected Flue if available
____ Furnace started
____ Gas pressure verified and adjusted if necessary
____ Temperature rise verified and adjusted if necessary per manufacturers specifications
____ Confirmed proper operation of thermostat and equipment staging
____ Drain trap cleaned (condensing furnaces)
____ Greeley Furnace sticker installed
Furnace Manufacturer: ______________
Furnace model number: ______________________________
Furnace serial number: Â ______________________________
Unit number: _____
Unit Location: ____________
Filter sizes:Â ____x ____x____ =____ / ____ x ____ x ____ = ____ / ____x ____x ____ = ____
Belt size: __________
Carbon Monoxide level reading: _____ PPM
Gas manifold pressure reading: _____ IWC
Furnace rated manifold gas pressure: _____ IWC
Furnace temperature rise: _____ degrees
Furnace temperature rise rating: _____ – _____ degrees
Amp draws total: _____ IBM motor: _____ Inducer motor: _____
Furnace Amp Draw rating: ______
Comments or Concerns by technician:
